Ballistik Powder System (BPS)

Introducing the Ballistik Powder System. A fully automated powder weighing and dispensing system.

Shipping Q4 2026. Units will be offered first come first serve based on the waitlist.  

-Integrates with the proven A&D FX series scales (FX-120i, FX-123, FX-300i)

-Loads from 4 to 50 cartridges per batch without operator interaction. 

-Self-Learning Powder Dispensing Profiles. Which can be locked, edited, and shared.

-Ability to throw varied charges for Load Development.

-Overcharge recovery. Rejected charges are dispensed into a separate container.

-Loads any rifle cartridge from 223 Rem/ 300 Blackout, to 338 Lapua. Includes bottom cartridge blocks for .223 Rem, 6.5 Creed, Magnum, and Lapua case heads. All share the same top block. Spare bottom blocks available separately for $28 each.

-Tool-less quick change blocks, trickler, and volumetric thrower modules. You can go from 300 Blackout to 338 Lapua in minutes. Extra modules, and module storage block available separately. 

-Fully controlled via built-in touch screen display.

-Compact, enclosed design: 18.5" W x 18.5" L x 29" H.

-Proudly made in Bozeman, Montana.

Three fundamental modes of operation: Hybrid, Trickler, and Volumetric.

Hybrid- Intended for high volume, long range competition ammunition. Uses both the Lee volumetric thrower, and our ball bearing trickler modules to rapidly dispense charges to deviations as low as the scale permits, +/- 0.02 grains. Works in both regular "Weigh Charges" and "Load Development" modes. 

Trickler- Intended for lower volume reloading when you don't want to adjust or use the volumetric thrower. Can be used to deviations as low as the scale permits, +/- 0.02 grains. Works in both regular "Weigh Charges" and "Load Development" modes. 

Volumetric- Intended for high quality, high volume ammunition such as ARs or other semi autos. Recommended deviation setting between +/- 0.05-0.1 grains. Uses the included Lee volumetric dispenser, and excludes charges outside your set weight range. Menu has a separate "Volumetric Calibration" page to assist in dialing in the thrower. 

No international shipping at this time. 

Patent Pending